Official Wiko Tommy 2 T3931 V3931 V3933 Stock Rom
Official Wiko Tommy 2 T3931 V3931 V3933 Stock Rom
Wiko Tommy 2 is a budget-friendly smartphone that was launched in 2017. It features a 5-inch IPS LCD display with a resolution of 720 x 1280 pixels. It is powered by a quad-core MediaTek MT6737 processor clocked at 1.3 GHz, coupled with 1 GB of RAM and 8 GB of internal storage. It runs on Android 7.0 Nougat and has a removable 2500 mAh battery. It also has an 8 MP rear camera and a 5 MP front camera, both with LED flash. It supports dual SIM, Wi-Fi, Bluetooth, GPS, and 4G LTE connectivity.
If you own a Wiko Tommy 2 smartphone and want to install the official stock firmware on it, then you are in the right place. In this article, we will show you how to download and install the official Wiko Tommy 2 stock ROM for T3931, V3931, and V3933 models. Installing the stock ROM can help you to fix various issues such as bootloop, lag, virus infection, software errors, or performance problems. It can also restore your device to its original state and remove any custom modifications or root access.
Download: https://shoxet.com/2w4eRL
Requirements
A Windows PC or laptop.
A USB cable to connect your device to the PC.
A backup of your personal data, as the process will wipe your device.
A charged battery, preferably above 50%.
The official Wiko Tommy 2 stock ROM file for your model. You can download it from [here].
The Wiko USB driver for your device. You can download it from [here].
The SP Flash Tool software. You can download it from [here].
Steps to Install Official Wiko Tommy 2 Stock Rom
Extract the downloaded stock ROM file to a folder on your PC.
Extract the downloaded SP Flash Tool file to a folder on your PC.
Install the Wiko USB driver on your PC.
Run the SP Flash Tool.exe file from the extracted folder.
Click on the Download tab and then click on the Choose button next to the Scatter-loading File option.
Browse and select the scatter file from the extracted stock ROM folder. It should be named MT6737M_Android_scatter.txt.
Make sure that all the partitions are checked and then click on the Download button.
Turn off your device and remove the battery if possible.
Connect your device to the PC using the USB cable while holding the Volume Down button.
The SP Flash Tool will detect your device and start flashing the stock ROM.
Wait for the process to complete. You will see a green tick mark when it is done.
Disconnect your device from the PC and insert the battery if removed.
Turn on your device and wait for it to boot up.
Congratulations! You have successfully installed the official Wiko Tommy 2 stock ROM on your device. You can now enjoy the original features and performance of your device. If you have any questions or problems, feel free to leave a comment below.